Programme at a Glance
The final programme is now available.
| |
Clarion Congress Centre |
| |
AQUARIUS |
TAURUS |
ZENIT |
LEO |
VIRGO |
NADIR |
| MONDAY, 7 SEPTEMBER 2009 |
| Registration 8h00 |
| Opening and Plenary Sessions 9h00 – 11h00 (ZENIT + NADIR) |
| 11h30-12h30 |
Risk and Hazard Analysis I |
Maintenance Modelling and Optim. I |
System Reliability Analysis I |
Offshore Oil and Gas I |
Critical Infrastructures I |
Biotechnology and Food Industry |
| 14h00-15h40 |
Risk and Hazard Analysis II |
Maintenance Modelling and Optim. II |
System Reliability Analysis II |
Offshore Oil and Gas II |
Critical Infrastructures II |
Health and Medicine |
| 16h10-17h50 |
Risk and Hazard Analysis III |
Maintenance Modelling and Optim. III |
System Reliability Analysis III |
Safety Management Systems |
Aeronautics and Aerospace |
Accident and Incident Investigation |
| TUESDAY, 8 SEPTEMBER 2009 |
| 08h40-10h20 |
Risk and Hazard Analysis IV |
Maintenance Modelling and Optim. IV |
System Reliability Analysis IV |
MC Methods in System Safety and Reliability |
Nuclear Engineering I |
|
| 10h50-12h30 |
Risk and Hazard Analysis V |
Maintenance Modelling and Optim. V |
System Reliability Analysis V |
Information Technology and Telecom. I |
Waterborne Transportation and Marine Industry |
|
| 14h00-15h20 |
Risk and Hazard Analysis VI |
Dynamic Reliability |
System Reliability Analysis VI |
Information Technology and Telecom. II |
Nuclear Engineering II |
|
| 15h50-17h30 |
Risk Control in Complex Environments |
Natural Hazards |
System Rel. Analysis VII |
Software Reliability |
Energy Production and Distribution |
|
| WEDNESDAY, 9 SEPTEMBER 2009 |
| 08h40-10h20 |
Integrated Risk Management and Risk-Informed Decision-making I |
Structural Reliability and Design Codes I |
Human Factors I |
Surface Transportation - Road and Train I |
Bayesian methods |
|
| 10h50-12h30 |
Integrated Risk Management and Risk-Informed Decision-making II |
Structural Reliability and Design Codes II |
Human Factors II |
Surface Transportation - Road and Train II |
Reliability and Safety Data Collection and Analysis I |
|
| 14h00-15h40 |
Integrated Risk Management and Risk-Informed Decision-making III |
Structural Reliability and Design Codes III |
Human Factors III |
Organizational Learning I |
Reliability and Safety Data Collection and Analysis II |
|
| 16h10-17h50 |
Integrated Risk Management and Risk-Informed Decision-making IV |
Uncertainty and Sensitivity Analysis I |
Human Factors IV |
Organizational Learning II |
Reliability and Safety Data Collection and Analysis III |
|
| THURSDAY, 10 SEPTEMBER 2009 |
| Plenary Session 8h40 – 9h30 (ZENIT + NADIR) |
| 10h00-11h40 |
Fault Identification and Diagnostics I |
Uncertainty and Sensitivity Analysis II |
Decision Support Systems and Software Tools for Safety and Reliability I |
Occupational Safety I |
Risk Perception and Communication |
Manufacturing |
| 13h00-14h40 |
Fault Identification and Diagnostics II |
Uncertainty and Sensitivity Analysis III |
Decision Support Systems and Software Tools for Safety and Reliability II |
Occupational Safety II |
Safety Culture |
Security and Protection |
| Conference Closing 15h10-16h00
(ZENIT + NADIR) |
Detailed Conference Programme
| MONDAY, 7 SEPTEMBER 2009 |
| Registration starts at 8h00 at the Clarion Congress Centre |
| Opening and Plenary Sessions 9h00 – 11h00 (Room ZENIT + NADIR) |
| Coffee break 11h00-11h30 |
| Parallel Sessions 11h30 – 12h30 (Clarion Congress Centre) |
| Session: Risk and Hazard Analysis I (Room AQUARIUS) |
Chair: M. Cepin |
Quantitative Risk Analysis for Underground Oil Transmission
Pipelines A.A.C. van Vliet, G.M.H. Laheij, R.J. Hansler
Risk Assessments for High Integrity Pressure Protection System by Using
Layer of Protection Analysis K.P. Chang, K.I. Nam, S.H. Jung, D.H. Lee
Responsibility Modelling for Risk Analysis R. Lock, T. Storer, I. Sommerville
& G. Baxter |
| Session: Maintenance Modelling and Optimization I (Room
TAURUS) |
Chair: A.Grall |
Condition-based Maintenance of Engineering Systems with
Periodic Inspection J.A.M. van der Weide, M.D. Pandey
Modelling Condition Monitoring and Dynamic Grouping of Maintenance Actions
with Extended Coloured Stochastic Petri Nets S. Nebel, A. Dieter,
B. Bertsche
Semi-Markov decision processes for determining multiobjective optimal condition-based
replacement policies M.C. Moura, I.D. Lins, P.R. Firmino, E.L. Droguett
& C.M. Jacinto |
| Session: System Reliability Analysis I (Room ZENIT) |
Chair: K. Kolowrocki |
A Practical Markovian Model of the Availability and Reliability
of a Mass Transport Service with Non-Exponential Repair Times A. Colini,
P. Erto, M. Giorgio, A. Testa
A proposed methodology for decision support on ageing systems S. L. Isaksen
A k-out-of-n system with components following Weibull distributions: An
algorithmic approach M.C. Olvera-Porcel, R. Pérez-Ocón & M.C. Segovia |
| Session: Offshore Oil and Gas I (Room LEO) |
Chair: J.E. Vinnem |
Assessment of Reliability and Residual Lifetime of Flexible
Risers Subjected to Time-varying Corrosive Environments B. J. Leira
Defined Situations of Hazard and Accident related to Integrated Operations
on the Norwegian Continental Shelf C. K. Tveiten, E. Albrechtsen, A.
B. Skjerve
Risk Regulation in the Norwegian Petroleum Industry: Robustness and Changing
Methods of Operation Preben H. Lindøe, Geir Sverre Braut |
| Session: Critical Infrastructures I (Room VIRGO)
|
Chair: E. Zio |
“Systém of systems” approach for interdependent critical
infrastructures I. Eusgeld, S. Dietz
A Multiple-Objective approach for the vulnerability assessment of infrastructure
networks Claudio M. Rocco S., J.E. Ramirez-Marquez, Daniel E. Salazar
A.
Risk Analysis of underground infrastructures in urban areas: time-dependent
interoperability analysis E. Cagno, M. De Ambroggi, O. Grande,
P. Trucco |
| Session: Biotechnology and Food Industry (Room NADIR) |
Chair: S. Martorell |
Aggregation of alarms to guarantee quality of pasteurized
honey E. Doménech, I. Escriche, S. Martorell
Combining predictive modelling and event tree analysis technique for a better
food safety management E. Doménech, I. Escriche, S. Martorell
How institutional contexts affect conditions for risk expertise H. Merkelsen |
| Lunch 12h30 – 14h00 |
| Parallel Sessions 14h00 – 15h40 (Clarion Congress Centre)
|
| Session: Risk and Hazard Analysis II (Room AQUARIUS) |
Chair: B.J.M. Ale |
Self-rescue and safety measures in quantitative risk analysis,
modelling and case studies for accidental toxic releases I.J.M. Trijssenaar-Buhre,
R.P. Sterkenburg
Risk Analysis Procedures for Explosives Manufacturing A. N. Haddad, E.
B. F . Galante
Parameterization of consequences of explosions T. Aschmoneit, C. Richter,
G. Gürke, B. Brombacher, J. Ziehm, I. Häring
Possibilities to evaluate technical measures in a Quantitative Risk Assessment
method for land use planning P.A.M. Uijt de Haag, S. Mahesh, E.S. Kooi,
L. Gooijer, M.A.M. Heijne
On the limitations of the maximum expected utility principle as a basis
for rational risk decisions M.T.Todinov |
| Session: Maintenance Modelling and Optimization II (Room
TAURUS) |
Chair: C. Berenguer |
Imperfect condition-based maintenance on a finite time span
for a gradually deteriorating system A. Ponchet, M. Fouladirad, A. Grall
On line condition-based maintenance for time dependent deteriorating systems
M. Fouladirad, A. Grall
A risk management approach to a maintenance decision for an ageing system
T.E. Nøkland, R. Flage, T. Aven
Employing Key Performance Indicators for improving processes within maintenance
O. Meland
Superposition of renewal processes for modelling imperfect maintenance
M.J. Kallen, R.P. Nicolai & S.S. Farahani |
| Session: System Reliability Analysis II (Room ZENIT)
|
Chair: I. Frenkel |
Strategies for handling common cause failures in complex
safety instrumented systems – an example to illustrate different methods
T. Lilleheier
A location-specific CCF model for supporting the system design process
A. Zitrou, T. Bedford
A solvable common-cause failure model for coherent systems C. Tanguy
Safety system reliability calculation - when are advanced formulas and calculation
techniques necessary L. F. Oliveira & S. Eisinger
SysML modelling of safety critical multi-technological systems U. Siebold,
M. Larisch, I. Häring |
| Session: Offshore Oil and Gas II (Room LEO) |
Chair: B.J. Leira |
Risk influence factors related to evacuation from offshore
installations Jon Espen Skogdalen, J. E. Vinnem
Fire loads for realistic risk assessment applications in petrochemical industry
P. Praks, S. Medonos, R. Raman
How shared situational awareness influence organizational accident risk
in the offshore oil industry T.O. Grøtan, K. Skarholt, E. Albrechtsen
Analysis of risk indicators for major accidents on offshore installations
J.E. Vinnem
Life extension of machinery in the oil and gas industry P. Vaidya, M.
Rausand |
| Session: Critical Infrastructures II (Room VIRGO)
|
Chair: C. Rocco |
Indicators of component criticality for failure cascade
process in network systems E. Zio & G. Sansavini
A structured approach to modeling interdependencies in risk analysis of
critical infrastructures I. B. Utne, P. Hokstad, J. Vatn
Modelling interdependencies amongst technical systems J.R. Santos-Reyes
Security analysis of Network Access Control implementations F. Cetin,
T. Dagonnier, P. Oechslin
Critical infrastructure safety management D. Prochazkova |
| Session: Health and Medicine (Room NADIR)
|
Chair: H. Merkelsen |
A hybrid technique to model dynamic aspects of risk in healthcare
settings R. Kazemi, M. Dierks, A. Mosleh
Design of an incident report analysis system for healthcare Y. Asada,
K. Furuta, T. Kanno
Modified logistic regression as a tool for discrimination M. Rabasová,
R. Briš & P. Kuránová |
| Coffee break 15h40-16h10 |
| Parallel Sessions 16h10 – 17h50 (Clarion Congress Centre)
|
| Session: Risk and Hazard Analysis III (Room AQUARIUS) |
Chair: E. Galante |
Comparison of different models for risk analysis to estimate
the manpower in the case of roughly defined project’s tasks S. Mehicic
Eberhardt, M. Missler-Behr
Comparison of two cost-benefit type of analyses to support a safety related
decision under large uncertainties: A case of use of wireless technology
in schools R. Steen, T. Aven
Improving safety in delayed coking units using HAZOP and LOPA methodologies
G. P. Monteiro, F. C. C. Barros, E. R. Marins, M. T. Halasz
Probit functions: derivation, evaluation and use in risk analysis R.J.
Hansler, P.M.J. Bos, P.A.M. Uijt de Haag, J.H.E. Arts, P.J.M.G. Frijns,
W .H. Könemann, H. Muijser
The potential of Risk Assessment based on statistical approach A. Giorgetti,
M. Delogu |
| Session: Maintenance Modelling and Optimization III (TAURUS)
|
Chair: M. Fouladirad |
A model of imperfect preventive maintenance efficiency based
on the concepts of elasticity and effective age J. Clavareau, P.-E. Labeau
A maintenance policy for passive components submitted to stress corrosion
cracking I.T. Castro, A. Barros, A. Grall
A novel approach to model the degradation of components in electrical production
plants P. Baraldi, M. Compare, G. Rossetti, E. Zio, A. Despujols
A two-phase inspection policy for a single component preparedness system
with a mixed time to failure distribution C. Cavalcante, P. Scarf, Adiel
de Almeida, A.T. Cosmo de Silva
Uncertainty factors in deterioration modelling of process equipment T.
Monsås & J. Vatn |
| Session: System Reliability Analysis III (Room ZENIT)
|
Chair: D.Valis |
Markov Reward Model for Performance Deficiency Calculation
of Refrigeration System I. Frenkel, L. Khvatskin & A. Lisnianski
A faster numerical procedure for solving non-homogeneous semi-Markov processes
M. C. Moura & E. L. Droguett
On the impact of deferred repair on the expected number of system failures
- a stochastic model M. Bretschneider
Importance Analysis of Multi-State System by tools of Differential Logical
Calculus E. Zaitseva
Models of availability maximization applied to "k-out-of-n" structures for
power systems I. Fele a, S. Dzitac, F. Popentiu & I. Dzitac |
| Session: Safety Management Systems (Room LEO) |
Chair: H. Kortner |
A multi-objective approach for risk-management to implement
an integrated management system: Quality, Security, Environment Ahmed
Badreddine, Taieb Ben Romdhane, Nahla Ben Amor
A study of railway ERTMS safety with Colored Petri Nets P. Barger, W.
Schön, M. Bouali
Exploring safety critical decision-making F. Størseth , R. Rosness, G.
Guttormsen
The use of safety management systems within the Norwegian tanker industry
– do they really improve safety? H.A. Oltedal
Improving Assignment and Qualification of safety manager at construction
sites Ki Sang Son, Won Mo Gal, Jae Nam Choi |
| Session: Aeronautics and Aerospace (Room VIRGO)
|
Chair: J.Andrews |
Risk Informed Oversight in Air Transport Using CATS B.J.M.
Ale, L.J. Bellamy, J. Cooper, D. Ababei, D. Kurowicka, O. Morales, J. Spouge
Cognitive Model of Team Cooperation in En-Route Air Traffic Control K.
Furuta, Y. Soraji, T. Kanno, H. Aoyama, S. Inoue, D. Karikawa, M. Takahashi
Team Cognitive Process Analysis of Air Traffic Controllers as Distributed
Cognition S. Inoue, H. Aoyama, Y. Soraji, T. Kanno, K. Furuta, K. Nakata
Risk Influence Modeling of Recent Developments in Helicopter Safety on the
Norwegian Continental Shelf T. Kråkenes , S. Håbrekke, I.A. Herrera
Methods applied to identify causes of air events J. Zurek, Z. Smalko,
M. Zieja |
| Session: Accident and Incident Investigation (Room NADIR)
|
Chair: I. Papazoglou |
Are industrial accidents foreseeable? S. Pierlot, Y.Dien
& M. Llory
Incident Cause Levels: An Integrated Approach to the Incident Investigation
M. Ferjencik
Learning from accidents (incidents) – theoretical perspectives on investigation
reports as educational tools G. S. Braut, O. Njå
Suggested proactive indicators to be used in oil and gas industry based
on a survey of accidents in the industry S.O. Johnsen
The innovative tools for prevention of accidents in a post-socialist country
M. Järvis, K. Reinhold, P. Tint |
| End of day |
| ESRA General Assembly meeting |
| TUESDAY, 8 SEPTEMBER 2009 |
| Parallel Sessions 8h40 – 10h20 (Clarion Congress Centre)
|
| Session: Risk and Hazard Analysis IV (Room AQUARIUS) |
Chair: T.Aven |
A new fire compartment system in tunnel. – The case of the
Gran Sasso National Laboratory A. Basti, D. Franciotti, G. Bucciarelli,
G. Panella
Evaluation of safety measures in road tunnels based on cost-effectiveness
analysis W. Røed, E.B. Abrahamsen, A.K. Midtgaard, K. Haver, H.S. Wiencke
Fluid Bearing Reliability Evaluation using a Numerical Design of Experiments A. Charki, R. Laronde, D. Bigaud, F. Guérin
Evacuation analysis: comparison between NFPA 130 and a micro-simulation
model A. Raffetti , B. Faragona, F. Vaccaro, L. Pedemonte
The branching model of successive events G. Dohnal |
| Session: Maintenance Modelling and Optimization IV (Room
TAURUS) |
Chair: A. Grall |
Dynamic maintenance optimization method for commercial heavy
vehicles. K. Bouvard, S. Artus, C. Bérenguer, V. Cocquempot
Interest of a global optimization tool for reliability models adjustment
and systems optimization A. Cabarbaye, J. Faure & R. Laulherent
Maintenance management and optimization of FPSOs E. Okstad, J. Vatn,
R. Bye
A comparison between different uncertainty propagation methods in multivariate
analysis R. Mullor, S. Martorell, A. Sánchez, N. Martinez-Alzamora
A new maintenance management model expressed in UML M. A. López Campos,
J.F. Gómez Fernández, V. González Díaz, A. Crespo Márquez |
| Session: System Reliability Analysis IV (Room ZENIT)
|
Chair: I. Frenkel |
Identification of betweenness-central groups of components
in a complex network infrastructure by genetic algorithms E. Zio, L.R.
Golea
Reliability assessment of network-based safety-related systems Y. Langeron,
A. Barros, A. Grall, C. Berenguer
Multiobjective Optimization of Fault-Tolerant Aircraft Systems Considering
System Degradation Christian Raksch, Frank Thielecke
Safety and reliability optimization of complex industrial systems and processes
K. Kolowrocki, J. Soszynska
Optimization of system component reliability characteristics at early design
stage with economically reasonable uncertainty level A. Kazeminia, M.
Junglas, D. Söffker |
| Session: MC Methods in System Safety and Reliability
(LEO) |
Chair: B.Fechner |
A framework for the Monte Carlo simulation of degradation
and failure processes in the assessment of maintenance programs performance
V. Zille, A. Despujols, P. Baraldi, G. Rossetti, E. Zio
Advanced discrete simulation methods applied to repairable multistate systems
A. B. Huseby, B. Natvig
Component importance measures to identify contributions to system failure
for aircraft which dispatch with known faults D.R. Prescott, J.D. Andrews
Comparative cost and utility analysis of monolith and fractionated spacecraft
using failure and replacement Markov models G. F. Dubos, J. H. Saleh
Subset Simulation and Line Sampling for Advanced Monte Carlo Reliability
Analysis E. Zio, N. Pedroni |
| Session: Nuclear Engineering I (Room VIRGO) |
Chair: S.Martorell |
Fire PSA for a German BWR - enhanced results and potential
plant specific improvements H. P. Berg, W. Frey, M. Röwekamp, M. Türschmann
Model uncertainties in a PSA for a nuclear power plant M. Kloos, J. Peschke
Nuclear power plant maintenance optimization A. Volkanovski, M. Cepin,
B. Mavko
Multiobjective optimization of test policies for GRP-modeled aging systems
V.C. Damaso, P.A.A. Garcia, M.C. Sant’Ana, P.F. Frutuoso e Melo
Reliability aspects of a stochastic non-stationary process L. Burgazzi |
| Coffee break 10h20-10h50 |
| Parallel Sessions 10h50 – 12h30 (Clarion Congress Centre)
|
| Session: Risk and Hazard Analysis V (Room AQUARIUS) |
Chair: V.Cozzani |
Impacts of the system technology on the Safety – Availability
relationship M. Voirin & J.A. Stoop
Formal Vulnerability Assessment: A methodology for assessing and mitigating
strategic vulnerabilities in maritime supply chains Ø. Berle & B. E.
Asbjørnslett
Key performance indicators for the inherent safety assessment of hydrogen
production and distribution system G. Landucci , A. Tugnoli, V. Cozzani
A comparative study on the application of simulation techniques for shipboard
fire safety analysis B. Dutta & A. Kar
Power system regularity challenges connected to electrification of large
scale offshore installations form land A. B. Svendsen, T. Digernes, Y.
Aabø, J. Eman, C. Hernandez |
| Session: Maintenance Modelling and Optimization V (Room
TAURUS) |
Chair: D.Prescot |
A bivariate optimum maintenance policy for a system under
revealed and unrevealed failures F.G. Badía, M.D. Berrade
Network maintenance contribution in quality terms on distribution network
services providers J.F. Gómez Fernández, M. López Campos, V. González
Díaz, A. Crespo Márquez
Increasing availability through maintainability growth using partial Multi
Criteria Decision Making J. Sobral, L.A. Ferreira
Integrating reliability centered maintenance and spare parts stock control
W. Jaarsveld & R. Dekker
Condition-based maintenance optimization for a binary monotone system using
a counting process approach R. Flage & T. Aven |
| Session: System Reliability Analysis V (Room ZENIT) |
Chair: K. Kolowrocki |
Design of complex safety-related systems in accordance with
IEC 61508 F. Brissaud, D. Charpentier, A. Barros, C. Bérenguer
Comparison of the failure behaviour of the same function in different systems
D. Althaus, A. Braasch, M. Schlummer, A. Meyna
Updating failure rates and test intervals in the operational phase: A practical
implementation of IEC 61511 and IEC 61508 S. Hauge, M. A. Lundteigen,
M. Rausand
Reliability Quantification of Equipment without Operational Experience
H. Kortner, S.L. Isaksen, H. Brandt
A comparison of safety analysis techniques: Analytical Calculations versus
MC Simulations J. R. Müller, T. Ständer & E. Schnieder |
| Session: Information Technology and Telecommunications
I (LEO) |
Chair: U.K.Rakowsky |
Guttman Scaling in the FMEA of IT Security Objectives in
Enterprises R. Mock, E. Kollmann, C. Ballhaus, H. Straumann
Modeling Resource Availability and Optimal Fee for Priority Classes in a
Website V.P. Koutras, A.N. Platis
Reliability Analysis of Next Generation Mobile Networks M. Guida, M.
Longo, F. Postiglione
Rollback and Roll-forward of Architecturally Fixed and Non-Fixed States
B. Fechner
Using virtualisation and simulation – the way to ensuring more reliable
and effective teaching and testing process IT technology I. J. Jozwiak,
A. Szleszynski |
| Session: Waterborne Transportation and Marine Industry (VIRGO)
|
Chair: E.Vanem |
Fire Safety Assessment of Hazardous Material Transporting
Ship using Fire Simulation B. Park, J. Choi, H. Kang, D. Lee
Risk estimation of the sea-going ship casualty as the consequence of propulsion
loss A. Brandowski, W. Frackowiak, H. Nguyen, A. Podsiadlo
The concept of navigational safety management on coastal areas L. Gucma
Quantitative analysis of maritime security assessment in ISPS Z.L. Yang
& J. Wang
Risk assessment in process of LNG terminal design M. Gucma |
| Lunch 12h30 – 14h00 |
| Parallel Sessions 14h00 – 15h20 (Clarion Congress Centre)
|
| Session: Risk and Hazard Analysis VI (Room AQUARIUS) |
Chair: Z.Vintr |
Assessment of major accidents triggered by lightning
E. Renni, G. Antonioni, V. Cozzani, E. Krausmann, A. M. Cruz
The Impact of Climate Change on the Need for a Probabilistic Assessment
of Harsh Weather Conditions in Germany G. Thuma, E. Hartwig-Thurat, M.
Krauß
Measures for reducing the probability of ruptures of high pressure natural
gas pipelines G.M.H. Laheij, A.A.C. van Vliet
What you should remember when reading psychometric studies of risk perception
C. Kermisch, P.-E. Labeau |
| Session: Dynamic Reliability (Room TAURUS) |
Chair: E.Zio |
An Approach to Calculate Multi-System Failure Coincidence
Probabilities U. K . Rakowsky
LARES —A Novel Approach for Describing System Reconfigurability in Dependability
Models of Fault-Tolerant Systems M. Walter, A. Gouberman, M. Riedl, J.
Schuster & M. Siegle
PAMOS and PAROS Parallel Addition of Multiple or Redundant Operands in a
Single Word K. Echtle, B. Fechner, J. Keller |
| Session: System Reliability Analysis VI (Room ZENIT)
|
Chair: H.Kortner |
Reliability and risk analysis of a ground ship-rope transporter
in variable operation conditions A.Blokus-Roszkowska, K. Kolowrocki
Reliability, risk and availability evaluation of port oil pipeline transportation
system J. Soszynska
Determining reliability parameters for a tree-structured commodity transfer
system with non-independent components J. Malinowski
Research on fuel cells reliability in order to use in accumulation systems
of electric energy R. Šebesta, Z. Hradílek, P. Moldrík |
| Session: Information Technology and Telecommunications
II (LEO) |
Chair: R.Mock |
UML-based Fault Injection for Software Model Testing
J. Mendizabal-Samper, A. Salterain, S. Urcelayeta, J. M. Blanco, A. Galarza
Application of Linear Logic to Backward Reachability Analysis of Colored
Petri Nets M. Boulali, J. Rocheteau, P. Barger
Safety analysis of the on-board front-end transceiver of the Balise Transmission
Module J. del Portillo, I. Adin, A. Villaro, U. Alvarado, J. Mendizabal |
| Session: Nuclear Engineering II (Room VIRGO) |
Chair: H.P. Berg |
Augmenting the Traditional Defense-in-Depth Strategy with the Concept of
a Diagnosable Safety Architecture E. Bakolas, J. H. Saleh
Monte Carlo Simulation for the Estimation of External Explosion Event Probability
J. Hauschild, M. Andernacht
Database and Simulator Supported Accident Management Strategies for the
Postulated Core Damage Scenarios S. Y. Park, K. R. Kim, .K. I. Ahn, Y.
Choi
A Comparative Study of Two Quantification Algorithms to Find Cable Importance in a Fire PRA Model K.Y. Kim, S.H Han, D.I. Kang |
| Coffee break 15h20-15h50 |
| Parallel Sessions 15h50 – 17h30 (Clarion Congress Centre)
|
| Session: Risk Control in Complex Environments (AQUARIUS) |
Chair: A.P-J Thunem, P. Fuchs |
An assessment of gaps and technical risks in sophisticated
technology implementation efforts in complex operations: A case from an
integrated production monitoring environment Jawad Raza, Jayantha P.
Liyanage
On the Use of Expert Judgment Elicitation for Autonomous Underwater Vehicle
Risk Prediction and Management M.P. Brito, G. Griffiths
Lifecycle Physical Hazards of Polymer Foam Board T. Nakarai, A. Miyake,
Y. Oka, A. Kimura, S. Managaki, Y.Yokoyama, H. Hondo, S. Masunaga,T. Kobayashi
Risks of Polyaromatic Hydrocarbons in Military Training Areas J. Kellner,
J. Navratil, F. Bozek, A. Bumbova, J. Dvorak
Evaluation of acute toxicity limits for purposes of risk analysis in the
Czech Republic B.Baudisova , P. Danihelka, D. Micek |
| Session: Natural Hazards (Room TAURUS) |
Chair: P.Praks |
The potential use of individual and societal risk criteria
within the Dutch flood safety policy (part 1): basic principles R.B.
Jongejan, S.N. Jonkman, B. Maaskant
The use of individual and societal risk criteria within the Dutch flood
safety policy (part 2): estimation of the individual and societal risk for
the dike rings in the Netherlands B. Maaskant , S.N. Jonkman, R.B. Jongejan
Vulnerability of mid-high rise commercial-residential buildings in the Florida
Public Hurricane Loss Model G. L. Pita, J.-P. Pinelli, K. Gurley, J.
Weekes, C.S. Subramanian, S. Hamid
EC Conformity of an Avalanche Release System B. Lanternier, J-M. Neuville
Learning from natural disasters: the case of Tabasco’s flooding J.R.
Santos-Reyes, R. Alvarado-Corona |
| Session: System Reliability Analysis VII (Room ZENIT)
|
Chair: J.Malinowski |
A practical approach for determination of reliability-oriented
system topology in mechatronic systems M.Junglas, A.Kazeminia, R.Eick,
D.Soffker
Mechatronic System Reliability Evaluation using Petri Networks and PHI2
Method A. Charki, A. Demri, F. Guérin, D. Bigaud
The Bayesian Reliability Growth Models Based on a New Dirichlet Prior Distribution
J. Tao, Z. Ming, X. Chen
Discrete simulation of reliability and availability systems A. Chovanec
, Z. Zwiasova
Mission completion probability of cycle rate system J. Famfulík
, J. Míková, R. Krzyžanek |
| Session: Software Reliability (Room LEO) |
Chair: E. Zaitseva |
Failure analysis of software for displaying safety-relevant
information B. Hulin, T. Schulze
On the influence of software vulnerabilities on software reliability: The
case of open source component based software G. Albeanu, H. Madsen, A.
Averian
Principles of the AOP 52 draft on software safety for the ammunition domain
M. Larisch, U. Siebold, I. Häring
The Use of Metrics to Assess Software Component Dependencies M. Kristiansen,
R. Winther, M. van der Meulen & M. A. Revilla
Identifying the Most Important Component Dependencies in Compound Software:
An Experimental Study M. Kristiansen, R. Winther & J. E. Simensen |
| Session: Energy Production and Distribution (Room
VIRGO) |
Chair: A. Volkanovski |
Increasing the reliability of outdoor MV network by means
of remote- controlled elements J. Gurecký, P. Moldrík
Modelling of energy supply disturbances in network systems J.Augutis,
R.Krikštolaitis, K.Šidlauskas, L.Martišauskas, V.Matuziene
Multi-objective genetic algorithm optimization of electrical power transmission
networks F. Cadini, E. Zio, C. A. Petrescu
Practical application of MCA8 software for improving reliability of energy
supply R. Šebesta, P. Moldrík, J. Gurecký
Reliability analysis of electric distribution grid by Monte Carlo method
A.T. Sikora, S. Rusek, V. Král, R. Gono |
| End of day |
| Conference Dinner |
| WEDNESDAY, 9 SEPTEMBER 2009 |
| Parallel Sessions 8h40 – 10h20 (Clarion Congress Centre)
|
| Session: Integrated Risk Management and Risk-Informed
Decision-making I (Room AQUARIUS) |
Chair: C.Vivalda |
Review and discussion of basic concepts and principles in
integrated risk management B. Ale, T. Aven, R. Jongejan
Adapted Principles of Risk-Informed Decision-Making for New Nuclear Power
Plants M. Cepin
Addressing uncertainties in risk-informed decision-making of changes to
NPP Technical Specifications S. Martorell, M. Villamizar, J.F. Villanueva,
V. Serradell, A.I. Sánchez
Theoretical aspects of using diversity for decreasing of nuclear power plant
operation risk J. Holy
An integrated approach for risk management based on systems availability
V.C. Damaso, R.M. Okamoto, P.A.M. Cabral |
| Session: Structural Reliability and Design Codes I (Room
TAURUS) |
Chair: C.G. Soares |
Probabilistic Assessment of Crack Width for Existing Bridges
J. Marková, M. Holický
Models of Thermal Actions for Bridges J. Marková
Assessment of Deteriorating Reinforced Concrete Road Bridges M. Holicky,
J. Markova & M. Sykora
A RSM Method for Probabilistic Nonlinear Analysis of Reinforced Concrete
Bubbler Tower Structure Integrity J. Králik
Using the Direct Determined Fully Probabilistic Method (DDFPM) for determination
of failure A. P. Janas, M. Krejsa, V. Krejsa |
| Session: Human Factors I (Room ZENIT) |
Chair: E. Zio |
Investigating situational characteristics in the contextual human information processing model for
warning citizens S. Sillem, J.W.F. Wiersma, B.J.M. Ale
A review of Decision Tree models for assessing Human Reliability
Analysis dependence L. Podofillini, V.N. Dang, P. Baraldi, M. Conti,
E. Zio
Use of ATHEANA to review emergency operating procedures at nuclear power
plants T. Ruiz-Sánchez & P. F. Nelson
How to deal with commission and omission errors in HRA P. Le Bot, H.
Pesme
A Proposal for Aviation Maintenance Safety Monitoring Process H.S. Rashid,
G.R. Braithwaite, C.S. Place |
| Session: Surface Transportation- Road and Train I (Room LEO)
|
Chair: T. Nowakowski |
Quantitative Risk Assessment for Railway Tunnels: an integrated
method and tool to support the fulfillment of the most recent normative
requirements G. F. D’Addio, A. Raffetti, L. Ginevri, S. Corona
Reliability and safety of railway signalling and interlocking devices
T. Krenželok, R. Briš, P. Klátil, V. Stýskala
Simulation approaches to evaluate dependability of satellite-based positioning
services in railway transportation applications J. Beugin, J. Marais,
A. Filip
Design of a testing bench for simulating tightened-up operating conditions
of train’s passenger access F. Turgis, R. Copin, P. Loslever, L. Cauffriez,
N. Caouder
RAM performance monitoring and MTBF demonstration on the SBB SA-NBS project
B.B. Stamenkovic, X. Villers, P. Dersin |
| Session: Bayesian methods (Room VIRGO) |
Chair: S.Tarantola |
A numerical procedure for handling mixed Bayesian networks
P. R. Firmino & E. L. Droguett
Contributions to Bayesian Network Model Design for Operational Risk in the
Financial Industry L. B . Andersen, D. Häger
Data-informed calibration of experts in Bayesian framework C. H . Shirazi,
A. Mosleh
Empirical Bayes Testing with Random Censoring T. Liang, W.T. Huang
Bayesian identification of the reliability states F. Grabski |
| Coffee break 10h20-10h50 |
| Parallel Sessions 10h50 – 12h30 (Clarion Congress Centre)
|
| Session: Integrated Risk Management and Risk-Informed Decision-making
II (AQUARIUS) |
Chair: M.Cepin |
Scientific foundations of risk in complex and dynamic environments
T.O. Grøtan, F. Størseth, E. Albrechtsen
Risk assessment methods applied to electricity distribution system asset
management D.E. Nordgård, K. Sand, I. Wangensteen
Incorporating risk analysis and multi-criteria decision making in electricity
distribution system asset management Maria D. Catrinu, Dag Eirik Nordgård
Establishing risk-based maintenance strategies for electricity distribution
companies D.E. Nordgård, K. Samdal
Asset Integrity Management Paradigm for Carbon Dioxide Underground Sequestration
C. Vivalda |
| Session: Structural Reliability and Design Codes II (Room
TAURUS) |
Chair: Z. Sadovsky |
Probabilistic safety redesign of existing structures
P. Bulota, A. Kudzys
Structural safety analysis from design to manufacture C. Elegbede
Control system design with dependability criterion using structural analysis
B. Conrard, V. Cocquempot, M. Bayart
Updating the safety level of concrete elements after conformity control
R. Caspeele , L. Taerwe
Probabilistic approaches in the safety analysis of road piers of annular
cross-section A. Kudzys & R. Kliukas |
| Session: Human Factors II (Room ZENIT) |
Chair: L. Podofillini |
Characteristics of the maintenance human errors involved
in unplanned reactor trips J. Kim, J. Park, W. Jung
A Data-Informed Model of Performance Shaping Factors and Their Interdependencies
for Use in Human Reliability Analysis K.M. Groth, A. Mosleh
Critical features of emergency procedures: Empirical insights form simulations
of nuclear power plant operation S. Massaiu
Accident Reporting Deficiencies related to Human and Organizational Factors
in Engine Room Fires on Board Ships J.-U. Schröder, M. Baldauf, K. T.
Ghirxi
Chaotic Voice Analysis Method for Human Performance Monitoring K. Shiomi |
| Session: Surface Transportation- Road and Train II
(Room LEO) |
Chair: G. Spadoni |
Application of safety principles for a guidance system in
public transport H. Schäbe, H. Vis, R. Bouwman
Logistic system modeling using Fault Trees with Time Dependencies – example
of tram network J. Magott, T. Nowakowski, P. Skrobanek, S. Werbinska
Reliability analysis of an ERTMS on-board balise transmission equipment
J. F. Sevillano, J. Mendizabal, I. Sancho, J. R. Martín, J. Meléndez
Evaluation of Pressure Load on Platform Screen Doors in a Metro System
A. Raffetti, B. Faragona, L. Caddeo, A. Chiappini
Exposure zones assessment of dangerous object transport T. Saska, J.
Novák |
| Session: Reliability and Safety Data Collection and Analysis
I (Room VIRGO) |
Chair: Z. Vintr |
Analysis of Accelerated Life Testing under Competing Failure
Modes with Initial Failures Yuanyuan Tan, Chunhua Zhang, Xun Chen, Yashun
Wang
The Superposition Principle to Develop the Concept of Accelerated Degradation
Testing S. Hossein Mohammadian, D. Ait-Kadi, F. Routhier
Satellite and satellite subsystems reliability: statistical data analysis
and modeling J-F. Castet, J. H. Saleh
On the MTTR demonstration by using MIL-HDBK-470A, Appendix B.4.2, Test Method
1, Test A B.B. Stamenkovic
Some Optimal Life Testing for Exponential Distribution Wen-Tao Huang,
Hui-Hsin Huang, Kun-Cheng Yang |
| Lunch 12h30 – 14h00 |
| Parallel Sessions 14h00 – 15h40 (Clarion Congress Centre)
|
| Session: Integrated Risk Management and Risk-Informed Decision-making
III (AQUARIUS) |
Chair: V. Cozzani |
Multicriteria risk analysis application in a distribution
gas pipeline system in Sergipe T.V. Garcez, A.T. de Almeida-Filho, A.T.
de Almeida, M.H. Alencar
Multiple dimension risk evaluation framework A.T. de Almeida-Filho, A.T.
de Almeida
Priorities Assignment for Actions in a Transport System Based on a Multicriteria
Decision Model M. H. Alencar, C. A. V. Cavalcante, A.T. de Almeida,
C. E. S. Neto
A risk-based cost-benefit analysis of LPG tank vehicles passive fire protection
N. Paltrinieri, S. Bonvicini, V. Cozzani, G. Landucci
Risk based design of coastal flood defences- A Vietnam case C. Mai Van,
P.H.A. J.M. van Gelder, J.K. Vrijling |
| Session: Structural Reliability and Design Codes III(Room
TAURUS) |
Chair: J. Markova |
Artificial neural network in probabilistic assessment of
strength of thin imperfect plates Z. Sadovsky , C. Guedes Soares
Investigation of parameter influences in wind induced structural reaction
analysis due to structural model dimensions changes E. Bombasaro
Deterministic and Probabilistic Analysis of Nonsymmetrical Wind Effects
to Symmetrical High Rise Buildings J. Králik, J. Králik, jr.
Probabilistic solution and reliability assessment of the hard rock disintegration
process K. Frydrýšek, P. Marek
Partial Factors for Light-Weight Roofs Exposed to Snow Load M. Holicky & M. Sykora |
| Session: Human Factors III (Room ZENIT) |
Chair: L. Podofillini |
Modeling nuclear power plant operator knowledge and procedural
adherence in the ADS-IDAC simulation model K. Coyne, A. Mosleh
The Development of a method and a tool for dynamic task representation as
part of a Virtual Reality Application M.C. Leva, F. Mattei, A. Kay, S.
Cromie, M. De Ambroggi, T. Kontogiannis
An Overview of Experience Gained in Long Term Applications of HRA in PSA Projects for WWER
Reactors J. Holy, J. Kubicek
Small steps towards big accidents O. A. Engen, O. E. Olsen
Modeling crew time variability in dynamic event trees D. Mercurio & V.N.
Dang |
| Session: Organizational Learning I (Room LEO) |
Chair: G.M. Lamvik |
Decision processes and improved HSE. Training as a contribution
to organizational learning and development T.M. Stene, M. Hermundsgård
& B.-E. Madsen
Assessment of HSE aspects by employees’ participation in organizational
development processes: “What you ask is what you get”. M. Hermundsgård
& L. Hansson
A Survey of Organization Studies Relevant to Safety and Dependability
Atoosa P-J Thunem
Job satisfaction and extensive participation processes in organizational
development – a case study from the Norwegian petroleum industry T. Korsvold
, L. Hansson, A. D. Lauvsnes
Disintegration and revival of tripartite collaboration on HSE in the Norwegian
petroleum industry A. Moen
, H. C. Blakstad, U. Forseth, R. Rosness |
| Session: Reliability and Safety Data Collection and Analysis
II (Room VIRGO) |
Chair: D. Prescot |
Importance of regarding the field failure behaviour of automotive
components A. Braasch, D. Althaus, J.-J. Baek, A. Meyna
Homogeneity and Scale Testing for small samples with censored and missing
data M. Stehlik
Data mining for identification and prediction of safety and reliability
characteristics of complex industrial systems and processes K. Kolowrocki,
J. Soszynska
Identification of significant Effects of Altering the Testing Process with
Regard to Reliability Growth Management D. Vesenmaier, P. Jäger
Used cars data processing and TÜV reliability statistics modification
J. Zajicek |
| Coffee break 15h40-16h10 |
| Parallel Sessions 16h10 – 17h50 (Clarion Congress Centre)
|
| Session: Integrated Risk Management and Risk-Informed Decision-making
IV (AQUARIUS) |
Chair: T.Aven |
Rethinking Sociological Perspectives on Risk for the Possibility to Analyse
and Manage Security Risks K. Pettersen, O. A. Engen, T. Aven
Impact of event duration on operational risk in financial
institutions: A control based approach D. Häger, L. B. Andersen
Integrating risk management into strategic planning in SMEs E. Kupi,
J. Keränen, M. Mikkola, T. Uusitalo
The impact of risk aversion on optimal economic decisions B. Kuijper
& M.J. Kallen
Social Vulnerability to Natural and Technological Hazards: The Relevance
of Scale J.M. Mendes, A.O. Tavares, S. Freiria, L. Cunha |
| Session: Uncertainty and Sensitivity Analysis I (Room
TAURUS) |
Chair: E. Plischke |
Uncertainty in reliability estimation: when do you know everything you know?
M.J.H.A. Houben, P.J.M. Sonnemans & M.J. Newby
A Dempster-Shafer theory of Evidence approach to model uncertainty analysis
P. Baraldi, E. Zio
Some useful features of the Bayesian setting while dealing with uncertainties
in industrial practice A. Pasanisi, E. de Rocquigny, N. Bousquet, E.
Parent
Uncertainty assessments in a semi-quantitative risk analysis, with application
to health care K. Eidesen, T. Aven
Estimating uncertainties in maximum entropy distribution parameters from
small-sample observations T. Most |
| Session: Human Factors IV (Room ZENIT) |
Chair: J. Holy |
A Fuzzy Bayesian Belief Net approach to HRA in Onshore Oil
Well Operations P. A. A. Garcia, C. M . C. Jacinto
Human Reliability Analysis for reducing risk in an LPG treatment and storage
plant M. Konstandinidou, Z. Nivolianitou, E. Plot, F. Camus, A. Monferini,
Ch. Leva, T. Kontogiannis, P . Kafka
Experiences with Human Factors in Norwegian petroleum Control Centre Design
and suggestions to handle an increasingly complex future A.L. Aas, S.O.
Johnsen, T. Skramstad
Human factors in the layer of protection analysis with emphasis on alarm
system management P. Kacprzak , K. T. Kosmowski
A Bayesian Network Model for Dependence Assessment in Human Reliability
Analysis P. Baraldi, M. Conti, M. Librizzi, E. Zio, L. Podofillini, V.N.
Dang |
| Session: Organizational Learning II (Room LEO)
|
Chair: A.P-J Thunem |
Building Safety by resilient organization – a case specific
approach F. Størseth , R.K. Tinmannsvik, K. Øien
Resilient Organizations and Resilient Praxis – a Review of Current Status
Related to Safety S.O. Johnsen
Professional Culture, Work Practice and Reliable Operations in Shipping
G.M. Lamvik, A.M. Wahl, M. Pettersen Buvik
Resilience and vulnerability: a complementary approach in order to diagnose
the level of safety of an organisation S. Pierlot, Y. Dien & M. Llory
Risks and engineering design across cultures J. Harvey, K.F. Pearce,
R. Jamieson |
| Session: Reliability and Safety Data Collection and Analysis
III (Room VIRGO) |
Chair: D. Valis |
Data Farming Quality, Improving the WSN Safety J.C.A.
Cansado, J.R. Almeida Jr., S. Viana, J. Pavon
An extended Bayesian updating approach to support product selection based
on performance testing – a drilling jar case J. T . Selvik, T. Aven
Contributions to the modelling of previsional reliability of hydroelectric
plants I. Felea & D. Meianu
Chi-Square Test of Goodness of Fit for Normal and Lognormal Distribution
with Applications N. Popoviciu & F. Baicu
Assessment of economical lifetime of heavy-duty machines. Case study
A. Jodejko-Pietruczuk, M. Mlynczak
& M. Zajac |
| End of day |
| THURSDAY, 10 SEPTEMBER 2009 |
| Plenary Session 8h40 – 9h30 (ZENIT + NADIR) |
| Coffee break 9h30-10h00 |
| Parallel Sessions 10h00 – 11h40 (Clarion Congress Centre)
|
| Session: Fault Identification and Diagnostics I (AQUARIUS)
|
Chair: J. Andrews |
An application of squared prediction errors of time domain
averaging across all scales on gearbox fault detection based on vibration
signals R. J. P. Ferreira, W. Wang, M. J. Zuo, A. T. Almeida
Application of a Dynamic Fault Diagnostic Method using Bayesian Belief Networks
on a Fuel Rig System M. Lampis, J. D. Andrews
FMECA of a turntable: A Fuzzy Assessment F. Costantino, M. De Minicis,
G. Di Gravio & M. Tronci
Fault Detection on Textiles by Adapted Biorthogonal Wavelets V. Finek,
D. Cerná
Wear prognosis based on identified damage accumulation models K.-U .
Dettmann, D. Soffker |
| Session: Uncertainty and Sensitivity Analysis II (Room
TAURUS) |
Chair: C. Rocco |
Lessons learnt from studies on sensitivity analysis techniques
in the EU project PAMINA: A benchmark study K.-J . Röhlig, E. Plischke,
R. Bolado Lavín, D.-A. Becker, P.-A. Ekström, S. Hotzel
Lessons learnt from studies on sensitivity analysis techniques in the EU
project PAMINA: Sensitivity analysis applied to different HLW PA models
R. Bolado, A. Badea, D.A. Becker, S. Spießl, K. Fischer-Appelt, J.L.
Cormenzana, M.A. Cuñado, T.J. Schröder, J. Hart, J. Grupa, E. Rosca-Bocancea,
R. Ávila, G. Pepin, F. Plas, K.-J. Röhlig, E. Plischke
Reliable design verification of nuclear turbosets using sensitivity analysis
on exceedance probabilities I. Zentner, S. Tarantola, E. de Rocquigny
An Effective Algorithm for Variance-Based Sensitivity Indices E. Plischke
Differential Importance Measure of Markov Models Using Perturbation Analysis
P. Do Van, A. Barros, C. Bérenguer |
| Session: Decision Support Systems and Software Tools for
Safety and Reliability I (Room ZENIT) |
Chair: I. Frenkel |
A Decision support system to evaluate gas pipeline risk
in multiple dimensions Y.G. Lopes, A. T. de Almeida, M. H. Alencar, L.
A. F. Wolmer Filho & G. B. A. Siqueira
Automating the synthesis of AltaRica Data-Flow models from SysML P. David,
V. Idasiak & F. Kratz
Supportive software for the multi-criteria decision making J. Gurecký,
P. Moldrík, J. Dvorský & R. Šebesta
TRACE: A Generic Tool for Dependable Requirements Engineering Harald
P-J Thunem
Analysis and optimization of repairable networks with merging flows M.T.Todinov |
| Session: Manufacturing (Room NADIR) |
Chair: B.J.M. Ale |
RAMS modeling for maintenance audits D. Galar, L. Berges,
J. Royo
The quality of graphical data display J. Nedbalek
Tools for Monitoring and Evaluating of Warranty Costs Development Z.
Vintr, M. Vintr
Warranty Cost Models State-of-Art: A practical review to the framework of
warranty cost management V. González
Díaz, M. López Campos, J.F. Gómez Fernández, A. Crespo Márquez
Cultural differences in design perceptions of consumer products: a Kansei
engineering approach K. Pearce, J. Harvey, R. Jamieson |
| Session: Occupational Safety I (Room LEO) |
Chair: C. Pantanali |
Applying the Safe Place, Safe Person, Safe Systems framework:
Case study findings across multiple industry sectors A.-M . Makin, C.
Winder
The effect of organizational size and structure on the management of OHS
risk: A review of two case studies in the chemical manufacturing industry
A.-M. Makin, C. Winder
Occupational Risk Management for Contact with moving parts of machines
I.A. Papazoglou, O. N. Aneziris, M. Konstandinidou, M. Mud, M. Damen,
J. Kuiper, H. Baksteen, L.J. Bellamy, J.G. Post, J. Oh
Occupational Risk Management for Electricity Hazard O. N. Aneziris, I.
A. Papazoglou, M. Konstandinidou, M. Damen, J. Kuiper, L.J. Bellamy, M.
Mud, H. Baksteen, J. Oh
The impact of the occupational safety control programs on the overall safety
level in an industrial cluster P.A . Bragatto, P. Agnello, M.G.Gnoni,
G.Lettera, F. A. Sciancalepore |
| Session: Risk Perception and Communication (Room
VIRGO) |
Chair: C. Vivalda |
Issues related to localization of an LNG facility J.
Vatn
Driver boredom and preferred driving speed S. Heslop, J. Harvey, N. Thorpe,
C. Mulley
Risk perception, extreme events and institutional trust: a local survey
in Portugal A.O. Tavares, J.M. Mendes, E. Basto, L. Cunha
Safety Risk Requirements for Combat Pistol and its Ammunition R. Jankovych,
J. Majtanik
The prevention of the professional poisoning caused by lead – case study
L. Sikorova , P. Danihelka, D. Micek |
| Lunch 11h40 – 13h00 |
| Parallel Sessions 13h00 – 14h40 (Clarion Congress Centre)
|
| Session: Fault Identification and Diagnostics II (AQUARIUS)
|
Chairs: P. Baraldi, S. Bracke |
Analysing multiple damage causes of complex products using
DCD algorithm and WCF approach S. Bracke, S. Haller
Aggregation of randomized model ensemble outcomes for reconstructing nuclear
signals from faulty sensors P. Baraldi, E. Zio, G. Gola, D. Roverso,
M. Hoffmann
Estimation of monitoring indicators using regression methods Application
to turbofan start sequence A. Ausloos, J.R. Masse, E. Grall-Maës, P.
Beauseroy, A. Grall
A short study on rebooting safe computers and the impact on safety E.N.
Rosenberg, H. Schäbe, I.B. Shubinsky
System health monitoring through Bayesian networks O. Borgia &
F. De Carlo |
| Session: Uncertainty and Sensitivity Analysis III
(Room TAURUS) |
Chair: S. Tarantola |
Composite Indicators for Security of Energy Supply in Europe
using Ordered Weighted Averaging Claudio M. Rocco S., Stefano Tarantola,
Anca Costescu Badea, Ricardo Bolado
Exploring uncertainty in quantitative risk assessment used for decision
support in electricity distribution system asset management D.E. Nordgård
Multi-reservoir production optimization under uncertainty Arne B. Huseby,
Nils F. Haavardsson
Handling epistemic uncertainties in fault tree analysis by probabilistic and possibilistic approaches
R. Flage, P. Baraldi, F. Ameruso, E. Zio & T. Aven |
| Session: Decision Support Systems and Software Tools for
Safety and Reliability II (Room ZENIT) |
Chair: M. Ferjencik |
Software critical for safety in reliability models J.
Sedlák
A knowledge-based approach for functional safety management T. Barnert,
K.T. Kosmowski, M. Sliwinski
Demand Optimization Model In Aeronautical Infrastructure to Maintain The
Safety Integrity Level Jamil Kalil Naufal Jr., João Batista Camargo Jr.
Simulation Model for Availability Assessment of Airspace Control Systems
W. N. Pizzo, P. S. Cugnasca |
| Session: Occupational Safety II (Room LEO) |
Chair: O. Aneziris |
Matching RATE analysis for SMEs with European Agencies data
C. Pantanali & C.Bianco
A Guide Line for a Strategic Occupational Safety Management Based on Statistical
Analysis in Jordan M.A. Mansour & I. M. Muslih
Crash Pulse Analysis Using Wavelets D. Cerná, V. Finek
Radars and Health Risk Assessment F. Bozek, J. Navratil, A. Bumbova,
J. Kellner, A. Langerova, L. Kubicek |
| Session: Security and Protection (Room NADIR) |
Chair: J. Kim |
Pool homogenisation for empirical Bayes models G. Hardman,
T. Bedford, J. Quigley & L. Walls
Terrorism risk as a change stimulus to the Norwegian society S.H. Jore
& O. Njå
Reliability analysis of the electronic protection systems with mixed – three
branches reliability structure A. Rosinski
Is the “k out of n” system really the best? J. Kamenicky
Landfills and Risk Identification A. Bumbova, F. Bozek |
| Session: Safety Culture (Room VIRGO) |
Chair: M. Hermundsgard |
Evidence-Based Development of Safety Culture at the Estonian
Enterprises M. Järvis, P. Tint
The Industrial Relations of Safety – differences in tripartite collaboration
in Norwegian industries L. Øyum, K. Skarholt, J. E. Ravn and T. Nilssen
Trust and Safety Culture: The Importance of Trust Relations in Integrated
Operations in the Norwegian Oil Industry K. Skarholt, H. Torvatn |
| Coffee break 14h40-15h10 |
| Conference Closing 15h10-16h00 (ZENIT + NADIR) |
|
|